• Black saddlebag holders made for the Classics Triumph motorcycles - including the Bonneville T100 / T120 / Speed Twin 900 & 1200 / Scrambler 900 and more (see compatibility guide below).
    Our spacers are manufactured from strong, durable steel. Thinner and more discreet than the official Triumph version, they work better with custom bikes.

    The top end fits behind the shock mounting bolt so your spacer blends in seamlessly with your motorcycle.
    All our saddlebag mounting systems work perfectly on these spacers. They are also compliant with the Klickfix system.

    Compatible with Classic Triumphs from 2016. Two small rectangular extenders allow you to mount your spacers on the Thruxton, and for the pre 2016 Bonneville, (2015 and before) we advise you to use our Bonneville Vintage Spacers to avoid any contact with the shock absorber. Choose the version that fits your Triumph's year.
    Read below for more details about compatibility and installation.


The most versatile spacer rails around.

Compatible with all the Longride mounting systems.
Fully compliant with the klickfix system.
More discreet than the Triumph ones.



Please watch this video to see the process.
The two anchor points for your spacer rail are the top rear suspension and the rear footpeg.
Remove the rear suspension unit top fixing screw and washer. Retain the washer for reuse. Install the spacer rail aligning the top fixing position with the rear suspension unit top mounting. Fit one of the M8 bolts from the kit and the original washer to hold the rail in position. Do not fully tighten the fixing at this stage.

Remove the rear footpeg lock nut. Holding the rear footpeg mounting bracket and fixings in position, fit the spacer rail onto the screw. Secure with a lock nut from the kit. Tighten the fixings.

On various models (such as the Thruxton) you might find that the spacer rails are too short on one end. Use the provided extenders to prolong your spacer rails. You can make one or both ends longer, and angle the extenders in any direction to meet the anchor point on your motorcycle.
Click here to view an example, where the extender is used to prolongate the top end of the spacer rail to fit a 2014 Bonneville.



Choose the correct year range for your Triumph motorcycle.

+ The 2016 - 2021 version has been tested on the Bonneville T100, T120, Scrambler 900, Street Twin, Speed Twin, Street Cup from 2016 to 2021.
+ Also compatible with the Thruxton from 2016 to 2021.
+ For the pre 2016 Bonneville check out the Bonneville Vintage Spacers.
+ They don't work with the Scrambler 1200 XC or Triple speed.
+ The 2022 version is made for the Classic Triumphs from 2022. Also works with the 2023 triumph speed twin 900 and 1200.
+ If your motorcycle is equipped with upgraded Triumph Fox shocks, they may interfere with your saddlebag holder. To resolve this, file off a corner of the bracket as shown in the picture to make it fit your setup. Afterwards, you can paint the newly filed area in black for a cohesive look.